12
DO NOT expose yourself for a long period to the air ow generated by the
device because it can cause damage to the health.
If the fan must be stored for a long period and is not used regularly, place
the fan in its original packaging in a dry place. When you use it for the
rst time after a long period of inactivity, make sure the fan is clean and
the motor blades turn feely (with the device not powered) without any
restraint.
Instructions for use
Support assembly.
Caution! The fan should always be switched o and does not connected
to the mains supply, if you mounting the fan.
To x the supports to the main body:
- set the fan gently on the head. Use a soft surface to not damage the
top of the product.
- take care on the indication of the supports: “L” is the left support, “R”
is the right support. The “FRONT” indicator with the arrow on both
supports indicates the front side;
- slide the supports on the main body.
Pay attention that all the parts are correct and rmly connected with each
other.
Caution! Connect to the mains supply only after the fan has been fully
assembled. The fan must not be used without supports.
Place the fan on a dry and stable surface, make sure the on/o/speed
knob is in o position (0) and insert the plug on the socket.
Technical informations
1 - On / O / Speed knob
2 - Blades
3 - Grid
4 - Main body
5 - Supports
3
2
1
4
5
To Next Page
Loading...
