EasyManua.ls Logo

ARDES AR5A90 - Page 11

ARDES AR5A90
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
recommended by the manufacturer. Do not allow packaging materials
like bags and staples can be reached by children.
Before connecting the appliance, check if the electrical voltage and
frequency of the circuit correspond to those indicated on the appliance.
The manufacturer is not responsible for any eventual damages caused
by improper or faulty use.
The unit must be connected to a good ground conductor.
Equipment must be installed at the height of at
least 2,3 meters from the floor (2,3 meters
means from the floor to the bottom of the fan).
Since the installation of the equipment sets, the
power of the network must be done through
flexible cable plug or by pole switch with
contact opening distance not less than 3 mm.
For the installation of the apparatus used a
cable type H05 VVF.
Before maintenance and cleaning operations
turn off the product and disconnect from the
mains power supply turning off the system
switch.
This appliance must not be supplied through an external switching
device, such as a timer, or connected to a circuit that is regularly switched
on and off by the utility.
If the appliance is out of work, switch it off without tampering it. If any
repair is required please contact only our after-sales centres and ask for
original spare parts. Otherwise safety of the appliance can be
compromised.
The use of every electrical appliace calls for the awareness of some basic
rules, such us:
-do not touch the appliance with wet hands or feet
-never expose the appliance to atmospheric conditions (rain, sun…)
Do not use the device in the presence of potentially explosive or
flammable liquids or gases.
Do not leave the appliance plugged in when not in use. Swith it off and
unplug it when it is not in use.
2.3 m
MIN

Related product manuals