7
GB
Technical information
Technical data indicated on the appliance.
1 - Power switch
2 - Lever to adjust the height of the haircut
3 - Cutting blades
4 - Comb
5 - Blade lubricating oil
6 - Scissors
7 - Small brushes for cleaning the blades
8 - Comb : cutting height from 3 to 6 mm
9 - Comb : cutting height from 6 to 9 mm
10 - Comb : cutting height from 9 to 12 mm
11 - Comb : cutting height from 12 to 15 mm
1
2
3
4
5
6
7
8
9
10
11
GB
Instructions for use
Before switching on the appliance, choose which cutting procedure you
would like to use.
The haircut can be performed using the xed blades of the appliance
directly or with one of the four interchangeable combs supplied to vary
the length of the haircut.
Select the comb you would like to use and insert it onto the appliance
until it is xed with the teeth facing upwards.
To remove the comb, just pull it upwards.
To Next Page
Loading...