GB
Maintenance
Disconnect the plug from the socket and let the appliance cool
down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasive products or chemical solvents.
Attenction: keep dry the appliance.
NEVER DIP THE APPLIANCE INTO THE WATER.
Cleaning the air inlet lter:
Make sure that the appliance is switched off and unplugged.
Remove the lter (Fig. A) and wash it with water only.
After carefully drying the lter,replace it correctly (Fig. B).
The appliance has a button (3) for a blast of cold air during hot air operation,
used to x the hairstyle.
Releasing the button returns to the previously set mode.
The concentrator (5) for directing the air ow on the hair and the diffuser
(7 – to be used with medium air ow and low temperature) for giving the hair
volume are supplied with the appliance.
To swtch off the appliance, set the Air Flow Switch to “0”.
Disconnect the plug after use.
WARNING:
- Let the appliance cool down before storing it.
- Do not wrap the power cord around the appliance.
FIG. A
FIG. B
12
To Next Page
Loading...