Ardo Calypso Manual

Ardo medical Ltd. T +44 (0)1823 336362
Visit www.ardomedical.co.uk or www.ardobreastpumps.co.uk
CALYPSO
ASSEMBLING THE PUMPSET
1) Attach the white lip valve,
by holding it on its side, to the
base of the breast shell.
NB please do not use a cleaning
brush on the lip valves
2) Take the breast shell and
screw it onto the bottle.
3) Place the flexible membrane
pot, smooth side out, in the top
of the breast shell and press
down firmly.
4) Line up the mark on the lid
with the mark on the breast
shell and gently turn the lid half
a centimetre to close.
5) Double Pumping - attach
two tubes to the connector.
Single Pumping - attach one
tube to the connector and
ensure the other stopper is
closed.
6) Insert the tube connector
into the pump and you are now
ready to start expressing.

Ardo Calypso Specifications

General

Type	Electric Breast Pump
Noise Level	Quiet Operation
Hospital Grade	No
Power Source	Mains or Battery
Included Accessories	Bottles
Pump Style	Double or Single
Hygiene	Closed System
Adjustable Settings	Adjustable vacuum and cycle settings
Phases	Two-Phase Expression