Assembling the Pumpset
1) Clean components
before use (excluding lid
and tubing) and ensure
all parts are FULLY DRY
before assembly.
NB see important notes below
about the lip valve.
2) Take the breast shell
and screw it onto the
bottle.
3) Place the exible
membrane pot, smooth
side out, in the top of the
breast shell and press
down rmly.
4) Press the green top
on the breast shell and
attach the tubing onto the
back of the lid.
5) Line up the central
mark on the green top
with the mark on the
breast shell, and gently
turn the top to the right.
6) Single Pumping - attach
one tube to the pump and
ensure the other stopper
is closed.
Double Pumping - attach
two tubes to the pump.
IMPORTANT INFORMATION
Lip Valve - Attach and remove this part carefully
from the breast shell as indicated. DO NOT use
a cleaning brush to clean this valve, just rinse
before sterilising. If the valve is damaged the
breast pump will not work. Spare valve(s) are
included with the pumpset.
Carum Breastpump
Mummies, stop and read,
it will make your expressing
journey so much easier.
HELP ME
PLEASE!
At Ardo we understand what it is like to be a new
mum and feel overwhelmed by having a new born
baby and the need to express.
This lea et illustrates how to use
the pump and assemble the pumpsets.
View our range
of expressing
and information
videos here
Ardo medical Ltd. Unit 1, Belvedere Trading Estate,
Taunton, Somerset TA1 1BH T +44 (0)1823 336362
info@ardomedical.co.uk www.ardobreastpumps.co.uk
WHO code
compliant
BPA free
To Next Page
Need help?
General
