Ardo HEA108X - OPERATION WITH PROGRAMMED START AND END OF COOKING TIMES

461307409 (RS-000)
17
GBUSER INSTRUCTIONS
4. OPERATION WITH PROGRAMMED START AND END OF COOKING TIMES
The oven may also be programmed to start at a later time. In this case, the oven is switched on and off
automatically.
• Select the required function with the right-hand keypad (A).
• If necessary, use the
and/or to adjust the cooking temperature in
programmes not using the GRILL (2,3,4,5,6,7,8) or the percentage grill power
in programmes using the GRILL (9,10).
• Press the
button. The fi gure “60” fl ashes on the display.
• Set the time with the
and/or buttons (max 199).
• Press the
button again to confi rm. The cooking time value now stops
fl ashing.
• Press the button. The END OF COOKING TIME is displayed, calculated
by adding the CURRENT TIME + COOKING TIME setting with the hour values
fl ashing.
• Set the time with the
and/or buttons.
• Press the button again. The hour value stops fl ashing and the MINUTES
value starts fl ashing.
• Set the MINUTES with the
and/or buttons.
• Press the button again to confi rm. The cooking time value now stops
fl ashing. Alternatively, after 7,5 seconds the fi gure stops fl ashing automatically
and the previous setting is automatically reselected.
• Press the button to enable the function. A beeper sounds to confi rm. If the
programme fails to start with the
button, when 10 seconds have gone
by the display clears automatically (only the clock is displayed).
• The
symbol starts fl ashing indicating that the programme is in progress.
• The symbol stops fl ashing once the cooking programme starts, specifi cally
when the end of cooking time coincides with the sum of the CURRENT TIME
value + the set COOKING TIME value, and a countdown timer starts.
• Cooking continues until the
button is pressed or after the SET COOKING
TIME has elapsed. In this case the oven is switched off automatically. A beeper
sounds to confi rm cooking has fi nished and the blinking bar
appears on
the XXX icon
.
Note: once the programme is fi nished, the numerical value of the time
taken (0) no longer displayed while all the other information is still visible.
In this way the user can verify how much time has passed from the end of
the programme and by how much the temperature has gone down in the
meantime.
Press the button to reset the oven.
N.B. If the button is pressed before the COOKING TIME value is set, the function remains inactive.
A safety system prevents confl icts between the CURRENT TIME value, the COOKING TIME setting and
the END OF COOKING TIME setting. The COOKING TIME setting has priority over all other settings.