Ardo HEA108X - OPERATION WITH PROGRAMMED COOKING TIME

461307409 (RS-000)
16
GB
3. OPERATION WITH PROGRAMMED COOKING TIME
The oven may also be programmed to start at a later time. In this case, the oven is switched on and off
automatically.
• Select the required function with right-hand keypad (A).
• If necessary, use
and/or to adjust the cooking temperature in
programmes not using the GRILL (2,3,4,5,6,7,8) or the percentage grill power
in programmes using the grill (9,10).
• Press the
button. The fi gure “60” fl ashes on the display.
• Set the time with the and/or buttons (max 199).
• Press the
button again to confi rm. The cooking time value now stops
fl ashing. Alternatively, after 7,5 seconds the fi gure stops fl ashing automatically
and the previous setting is automatically reselected.
• Press the button to enable the function. A beeper sounds to confi rm. If the
programme is not started with the
button, after 10 seconds the display clears
automatically (only the clock is displayed).
• The
symbol starts fl ashing indicating that the programme is in progress.
The END OF COOKING TIME is displayed, calculated by adding the CURRENT
TIME + COOKING TIME setting and a countdown timer starts.
• Cooking continues until the button is pressed or once the SET COOKING
TIME has elapsed. In the latter case the oven is switched off automatically. The
end of cooking time is confi rmed by a beeper and the blinking bar
appears
on the
icon.
Note: once the programme is fi nished, the numerical value of the time
taken (0) is no longer displayed while all the other information is still
visible. In this way the user can verify how much time has passed from the
end of the programme and by how much the temperature has gone down
in the meantime.
Press the button to reset the oven .
USER INSTRUCTIONS