1. Connect the HAT’s MIPI_TX0 port to Raspberry Pi’s camera port.
Turn o your Raspberry Pi and disconnect the power supply.
1
4 x 64MP Autofocus
Camera Module
(Exclusive Version)
3 x Screw 3 x Spacer 3 x Nut
1 x Quad-Camera HAT
4 x Fex Cable (For Cameras)
1 x Flex Cable (For Raspberry Pi)
Arducam
UC-693
Arducam
UC-440
Packing List
Installation
64MP-AF Synchronized Quad-Camera Kit for Raspberry Pi
To Next Page
Loading...