Arduino MKR1000 User Manual

Windows now will take over the driver installation.
(//www.arduino.cc/en/uploads/Guide/Win10MKR1000Install_3.png)
You have installed the driver on your computer. In the Device Manager, you should now see a port listing
similar to “MKR1000 (COM24)” If you have multiple COM devices, the MKR1000 will probably be the COM
port with the highest number.

Arduino MKR1000 Specifications

General

Microcontroller	SAMD21 Cortex-M0+ 32bit low power ARM MCU
Operating Voltage	3.3V
Digital I/O Pins	8
PWM Pins	12
Analog Input Pins	7
Flash Memory	256 KB
SRAM	32 KB
Clock Speed	48 MHz
DC Current per I/O Pin	7 mA
Input Voltage (VIN)	5V
PCB Dimensions	61.5 mm x 25 mm
WiFi Module	WINC1500
Secure Element	ATECC508
UART	1
SPI	1
I2C	1
LED_BUILTIN	6
Length	61.5 mm
Width	25 mm
Weight	32 g
Analog Output Pins	1
WiFi	IEEE 802.11 b/g/n 2.4 GHz
Crypto Authentication	Yes