ARE CX CLASSIC User Manual

22103-004 22103-017
Preparing the cap for installation. Lay the crate at so that the
cap (A) is in the installed position. Carefully disassemble the crate
allowing you to lift the cap out of the crate. Inspect and clean the cap. Clean
the outside of the cap by using clean low-pressure water and mild soap.
Be sure to clean the front window thoroughly before the installation of the
cap on the truck.
Remove the shipping rails.
A.R.E. Accessories • 400 Nave Road, Massillon, OH 44648 • 866.658.8376 • 4are.com © A.R.E. Accessories LLC, 2021
Part# 24953 Rev. 12-15-21
2
INSTALLATION SHEET
Any damaged or missing parts?
Parts will be shipped to you directly.
Call 866-658-8376, Mon - Fri, 8:00 a.m. - 4:00 p.m. EST
JEEP GLADIATOR CAP
PARTS INCLUDED
IN YOUR KIT
Cap
1x Mounting tape
2x Cap clamps 22103-004
(trucks without utility tracks)
2x Cap clamps 22103-017
(trucks with utility tracks)
1x Wiring harness
1
TOOLS
REQUIRED
l Fork lift
l Saw horses
l Wire snips
l Pliers
l Mild soap
l Glass cleaner
l Cleaning rags
l
Denatured alcohol
l Scissors or cutting tool
l Masking tape
l 9/16” wrench
l 7/16” wrench
l Allen wrench set
l Pry bar and hammer
(to disassemble crate)
l Adjustable at head clamps
(recommended welding style)
CX CLASSIC
A
E
C
B
D
B C
A
D E

ARE CX CLASSIC Specifications

General

Brand	ARE
Model	CX CLASSIC
Category	Automobile Accessories
Language	English

Summary

Jeep Gladiator Cap Installation

Prepare Cap for Installation

Lay crate flat, disassemble, lift cap, inspect, and clean cap and front window with mild soap and water.

Remove Shipping Rails

Remove the shipping rails from the truck bed as the first step of installation.

Prepare Truck Bed Rails

Clean truck bed and rear window. Lay carpet/cardboard to protect bed finish. Tape off areas to prevent impact.

Position and Secure Cap

Check bed squareness. Place cap on truck, ensuring no contact with bed surface. Use clamps to align rear corners.

Final Cap Adjustments and Clamping

Adjust cap position as needed. Install appropriate clamp kits for trucks with or without utility tracks.

Connect Wiring and Finish

Hook up the wiring harness for lights directly to the battery and remove any stickers.

Limited Lifetime Warranty

Warranty Coverage Details

Details structural integrity, paint fading, and specific component warranties for the truck cap.

Hardware and Exclusions

Covers hardware, gas props, and windows, excluding neglect, abuse, accidents, and stress cracks from impact.

Warranty Process and Claims

Outlines the procedure for making warranty claims, including registration and dealer contact.

Product Care and Safety

Care and Maintenance Guide

Provides instructions for washing, waxing, and protecting the cap's finish and components.

Safety Instructions

Includes precautions for children in the cargo area and checks for the center high mount stop light.

Replacement Parts

Information on how to obtain replacement parts for the truck cap.