Why is my AREBOS Jack not lifting?
If your AREBOS jack is not lifting, it could be due to a few reasons. First, ensure the valve is completely closed. If the issue persists, check the oil level and add more if necessary. Lastly, there might be air in the hydraulic system, which requires venting.
What to do if my AREBOS Jack sinks under load?
If your AREBOS jack sinks under a load, the issue might be related to the valve not being completely closed. In this case, check the valve and ensure it is properly closed. Another potential cause is air in the hydraulic system, which would require venting.
How to fix an AREBOS Jack that doesn't lift to full height?
If your AREBOS jack isn't lifting to its full height, it might be due to air in the hydraulic system, which requires venting. Alternatively, the jack may not have enough oil. Check the oil level and top it off if needed.
Why is the pump rod not stable on my AREBOS AR-HE-HRW3T?
If the pump rod of your AREBOS jack is not stable, it is possible that there is air in the hydraulic system. You should vent the system to resolve this issue.
What to do if my AREBOS Jack cannot be lowered completely?
To address this issue, lubricate the hydraulic parts of your AREBOS jack.
How to fix an AREBOS Jack that will not lift the load?
If the AREBOS jack won't lift the load, ensure you are using a jack with adequate capacity. Additionally, top up the oil level, check and close the release valve, or open the release valve and pump the handle a few times before closing it and retrying. If these steps don't work, consider cleaning and replacing the oil.
What to do if AREBOS AR-HE-HRW3T Jacks lift but will not hold load?
If your AREBOS jack lifts but doesn't hold the load, check and close the release valve. You may also try lowering the jack, closing the release valve, placing your foot on the front wheel, and pulling up the lifting arm to its full height by hand before opening the release valve to lower the arm. Alternatively, open the release valve and pump the handle a few times, then close the valve and retry.
Why AREBOS AR-HE-HRW3T Jacks does not lift high enough or feels “spongy”?
If the AREBOS jack does not lift high enough or feels spongy, try filling or removing excess oil. You can also open the release valve and pump the handle a few times, then close the valve and retry. Also, ensure you check and close the release valve.
How to fix AREBOS AR-HE-HRW3T that lifts poorly?
If your AREBOS jack lifts poorly, try cleaning the valves or replacing the oil. Alternatively, open the release valve and pump the handle a few times, then close the valve and retry.
What to do if AREBOS AR-HE-HRW3T will not lower completely?
If the AREBOS jack will not lower completely, try oiling all external moving parts. If that doesn't work, consider replacing the rod or spring if they are broken. Alternatively, open the release valve and pump the handle a few times, then close the valve and retry. Ensure you check and fully open the release valve.
Explains safety symbols like CE, Warning, and Danger of crushing.
Lists crucial safety precautions and usage guidelines for operating the jack.
Identifies and labels the main components of the hydraulic trolley jack.
Instructions for inspecting the jack for leaks or damage before use.
Steps for assembling the handle and preparing the jack for first use.
Procedure to remove air from the hydraulic system for optimal performance.
Guide to checking and refilling the hydraulic oil level correctly.
Detailed steps for safely lifting a vehicle using the jack and jack stands.
Detailed steps for safely lowering a vehicle from jack stands.
Visual representation of all jack components with reference numbers.
Routine care and lubrication guidelines for the hydraulic jack.
Solutions for common problems like the jack not lifting or holding load.
Key technical data including load capacity, dimensions, and material.
Instructions for recycling packaging and disposing of old equipment.
Statement of compliance with relevant EU health and safety directives.
To Next Page
General