Arenti SP1 - Installation

3. Installation
EN
EN
Sun
1. Select a position with the most sunlight throughout the
year for your solar panel.
The Ideal Angle=The Local Latitude + 5°
The solar panel only needs a few hours of direct sunlight
to sufficiently power your camera daily.
1
2
3
4
2. Mount the bracket with the mounting template and the
screws provided in the package.
4. Loosen the adjusting control on the bracket and adjust
the angle of the solar panel to make it receive direct
sunlight, and then retighten the adjusting control to
secure your setting.
5
3. Slot the solar panel into the bracket and make sure the
security.
5. Connect the solar panel to the Camera with the micro
USB connector.