3/8 MICROMETER TORQUE WRENCH
OPERATIONS MANUAL
STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE 1
43012
WARNINGS
• Make sure to read and understand these instructions carefully, including all safety information, before using torque wrench.
• This tool is a precision measuring instrument. Handle with care and store properly.
• Do not attempt to increase leverage of this wrench with any other device. Failure to follow all instructions could result in
damage to torque wrench, property damage, or injury.
• This wrench is shipped ready to use, calibrated and tested to an accuracy of +/- 3%. To maintain this accuracy, it is
important that your wrench is stored at the lowest torque setting, 10 ft/lbs (13.6 Nm). This setting relieves extra tension on
the internal spring, eliminating fatigue to critical components.
• Do not exceed adjusted torque setting while operating wrench. Release when click sounds.
• Do not use wrench to break free stuck fasteners or to loosen fasteners.
Torque Range – 10 – 100 ft/lbs (13.6 – 135 Nm)
To Next Page
Need help?
General
