Main Features
• Full size 2.4GHz 4-channel transmitter
• Dual rates and digital trims
• 360° Flip button
• 780mAh 3.7V LiPo battery
• AC wall charger
• Bright LED lights for easy orientation
• Spare set of props included
• Supports WiFi FPV camera (sold separately)
• Supports some QX130 accessories (sold separately)
Specications
• Rotor diameter: 140mm (5-1/2”)
• Height: 65mm (2-1/2”)
• Weight: 110g (3.9 oz.)
• Motors: 8520 Coreless (4)
• Battery: 1S 3.7V 780mAh 20C Lithium Polymer
• Charger: 110-220V AC wall-charger
• Transmitter: 4-channel 2.4GHz
• On-Board Electronics: 5-in-1 control board
Install Transmitter Batteries
• Open the battery compartment door on the rear of the
transmitter
• Install 4 fresh AA batteries
• Make sure to maintain the correct polarity as
indicated in the battery box
• Turn the transmitter ON to check that installation is
correct
2
To Next Page
