Need help?Do you have a question about the Argo DADOS 9 PLUS and is the answer not in the manual?
General| Energy efficiency class cooling | A |
|---|---|
| Refrigerant | R290 |
| Timer | Yes |
| Power Supply | 220-240V / 50Hz |
| Power Consumption (Cooling) | 1000 W |
| Energy Efficiency Ratio (Cooling) | 2.6 |
| Cooling power in BTU | 9000 BTU |
| Cooling power in Watts | 2600 |
| Noise Level (Indoor) | 19 dB |
| Noise Level (Outdoor) | 48 dB |
Safety guidelines for electrical work, disassembly, sharp edges, installation area, power cable, flammable gas, and water exposure.
Precautions regarding refrigerant leakage, drain hose, installation surface, hot air outlets, lifting, and sea wind exposure.
Guidelines for operating the unit, avoiding direct cool air, not blocking airflow, cleaning, filter maintenance, and handling drain water.
Details on unit models, power supply, cooling/heating capacity, consumption, and EER/COP.
Technical data including refrigerant, pressure, moisture removal, airflow, and noise level.
Physical dimensions and weight specifications for the unit, including packing dimensions.
Specifications for compressor, fan motor, evaporator, and condenser components.
Visual representation and dimensions (width, depth, height) of the air conditioner unit.
A diagram illustrating the room air conditioner's refrigeration cycle and its main components.
Circuit diagram and visual layout of the Printed Circuit Board (PCB) for the unit.
Diagrams illustrating the control logic, remote receiver, and display panel logic.
Detailed wiring diagrams for DADOS 9/13 and DADOS XL models.
Table listing screws, their positions, and quantities required for disassembly.
Instructions for disassembling the unit's casing, starting with side panels.
Steps for removing the air filter and hot air louver from the unit.
Instructions for disassembling the unit's case using buttons and removing front/back casing.
Steps for disassembling the top casing and removing the Printed Circuit Board (PCB).
Detailed steps for dismantling the water motor, including condenser removal.
Steps for disassembling the motor, including removing top metal parts and polyfoam.
Identification of various parts of the air conditioner, including front and rear views.
Explanation of LED indicators and display features for DADOS models.
Description of the digital remote control and its required AAA batteries.
Description of connections and kits for window installation.
Overview of the unit's electronic functions, including cooling, heating, dehumidifying, auto switch, and sleep modes.
Technical specifications for the controller, including power source, operating temperatures, and humidity range.
Explanation of control logic structure and definitions of temperature sensors (TA, TE, TS).
Details on cooling, dehumidification, and heating modes, including operational conditions.
Explanation of the compressor delay protection mechanism and its timing.
Details on compressor restart period and defrosting protection modes (electrical and two-way valve).
Procedures for testing compressors, including wiring, ground, and efficiency checks.
Steps for checking compressor winding continuity and testing for grounding issues.
Method to check compressor efficiency by monitoring pressures and temperature differences.
Explanation of external and internal overload protection in compressors and their function.
Procedure for testing the internal compressor overload using an ohmmeter.
Introduction to equipment and procedures for sealed refrigeration system repairs.
List of necessary equipment and their capabilities for refrigeration system repairs.
Step-by-step procedure for replacing a hermetic compressor in the refrigeration system.
Specific steps for handling compressor motor burnout, including flushing and cleaning.
Specific service for rotary compressors and accurate refrigerant charging procedures.
Description and testing procedures for fan motors and capacitors.
Detailed steps for testing capacitors for shorts, opens, and visual defects.
Definition of R25 and B values for temperature sensor characteristics.
Table showing resistance values for various temperatures for the temperature sensor.
Troubleshooting steps for no power display, remote control failure, and intermittent fan motor operation.
Troubleshooting steps for compressor stopping, fan motor not running, and fan motor noise.
Troubleshooting steps when the compressor does not run while the fan motor does.
Troubleshooting steps for excessive noise, water full alarm, and poor cooling/heating performance.
Troubleshooting steps for the unit not providing cooling or heating, and frequent start/stop cycles.
A flowchart guiding through troubleshooting common operational problems.
A flowchart for troubleshooting electrical system issues.
Operating temperature and humidity limits for DADOS XL and 9/13 PLUS models.
Recommended setting temperatures for cooling and heating modes.
To Next Page
