11
EN
PARTS AND FUNCTION
INFORMATION DIODES
Door open - lights up when bin is opened. Check bin to make sure it is properly
closed.
Overload- lights up when paper jam occurres
1. Set the operation button to "R" position for 2-3 seconds.
2. Set to "R" and "F" alternately back and forth until the jammed paper
getting loosen up.
3. Set to Power and unplug.
4. Gently pull uncut paper from paper entry, plugin.
5. Set to "F" to restart the shredder.
Overheat - lights up when the shredder is overloaded. Operation will resume on-
ce cooled down.
Bin full - lights up when the bin is full. Open the bin, pull out carefully, then dump
the shreds and replace the bin.
Power
Overload
Door Open
Paper entry
Window
Bin
Lakable caster
© ARGO S.A. www.argo.pl
To Next Page
Loading...