argon audio iNet 1 - Playing Media Files from Your MP3 Player

Wireless Internet & FM Radio
6. Turn the knob until ‘Repeat’ is displayed.
7. Press the SELECT button.
8.
Turn the knob to select YES/NO to conrm that repeat mode should be enabled.
Playing media les from your MP3 player
1. Connect your MP3 player on the back side of the Argon iNet1, using the AUX-IN plug.
The cable connector should be mini-jack stereo.
2. Once your MP3 player has been connected to the Argon iNet1, use the FUNCTION key
on the front panel, to select AUX IN.
36