Need help?Do you have a question about the argon audio ONE PI 4 V2 and is the answer not in the manual?
General| Brand | argon audio |
|---|---|
| Model | ONE PI 4 V2 |
| Category | Control Unit |
| Language | English |
Connect Raspberry Pi to HDMI-Audio Board and apply silicon thermal pads.
Connect Raspberry Pi GPIO to the cooling board; ensure microSD is not inserted.
Fasten the Raspberry Pi and HDMI board assembly to the top case using shorter flat head screws.
Select power button management mode (Default or Always ON) via jumper pins.
Fasten the bottom cover with longer screws and attach rubber footings.
Insert the SD card, connect HDMI and power supply, then press the power button.
Install software via terminal to enable power button and fan control features.
Details power button functions: turn on, soft shutdown, reboot, and forced shutdown.
Explains default fan speed settings by CPU temp and how to customize them.
Uninstall the Argon ONE Pi 4 script using the desktop icon or terminal command.
Configure the Infrared Receiver's ON/OFF signal via the terminal application.
To Next Page