Changing replay speed
To play records at 45 r.p.m. first remove the platter (3). Using the accessory tool provided, hook the belt over the larger diameter
part of the motor pulley (2/22). Refit the platter. To revert to 33,33 r.p.m. repeat the proceedings using the smaller step on the
pulley.
Fitting and connecting the cartridge
** All cartridges with half inch mounting holes can be fitted. Leaving the needle's protection cover on, fit the cartridge to the
headshell using the screws supplied with the cartridge by passing one screw through each slot in the headshell (11). Do not
tighten the nuts yet.
Connect the tonearm wires to the cartridge pins as follows:
white left channel positive (L+)
red right channel pos. (R+)
green right channel return (R -)
blue left channel return (L -)
The full sound quality of the Argon Audio TT2 can only be achieved if the cartridge is correctly adjusted.
If you are not well acquainted with the adjustment of cartridges you are advised to call upon the willing help of your Argon Audio
dealer to accomplish this task for you.
To Next Page
Loading...
