2
1
3
1.ON/OFF Switch & Power On indicator light
Press the ON/OFF button once to start the operation of the unit. The power on indicator
light [3] will be illuminated. Press the button again to switch the unit off.
2. Water tank full indicator light
When the water tank is full, the unit will switch itself off and this water tank full indicator
light will be illuminated.
NOTE :
When the frost builds up on the evaporator coils, the automatic defrost function will
be started. The compressor will be turned itself off and the fan will continue to run until
the frost is removed.
- The unit will continue to operate until the water tank is full or you switch it off.
- Ensure to switch it off when not in use.
CONTROL PANEL
ON/OFF Switch
3
To Next Page
Loading...