Argos VU-01e - Parts Identification; Vacuum Cleaner Components; Included Filters; Required Assembly Tools

3
Please familiarise yourself with parts and accessories listed below
AssemblyParts
If you have damaged or missing parts, call
the Customer Helpline: 0845 6042377
4
9
18
HEPA media filter
Pre motor filter
1 x Crosshead
screwdriver
1
2
3
4
5
6
7
8
HEPA media filter
Power cord
Dirt container
On/off button
Cable clip
Upper hose caddy/carry handle
Hose/tool connector
Lower hose caddy
Turbotool caddy
Filters (pre-assembled in product) Tools required for assembly
9
10
11
12
13
14
15
16
17
Hose
Crevice tool
Dirt container release handle
Extension tube
Dirt release button
Floor height adjust slider
Turbotool (VU-02e only)
Upper cord wrap
1
7
8
9
11
10
2
3
4
5
6
12
17
13
14
15
16
18
9
Initial Setup for normal operation
1. Use the base accessories.
– Shortest hose
– Extension tube set to shortest practicable length.
2. Clean filters installed.
3. Dust receptacle empty.
4. All Bleeds must be closed.
5. Variable Power set to Maximum.
6. Floor heads/tools set to Carpet Mode for carpet cleaning.
7. Mechanical Agitation turned ON for carpet cleaning.
8. Floor heads/tools set to Hard Floor Mode for hard floor cleaning.
9. Mechanical Agitation turned OFF for hard floor cleaning.