M
matthewlindseyJul 26, 2025
What to do if my Argox OS-2130D Label Maker printer is in PAUSE status?
- DDavid KimJul 26, 2025
If your Argox Label Maker is in PAUSE status, press the FEED button to resume printing.
To Next PageTo Next PageWhat to do if my Argox OS-2130D Label Maker printer is in PAUSE status?
If your Argox Label Maker is in PAUSE status, press the FEED button to resume printing.
What to do if my Argox Label Maker has a paper jam?
If your Argox Label Maker has a paper jam, recover the jam.
What to do if my Argox Label Maker has a cutter failure or paper jam inside the cutter?
If the cutter has failed, or there is a paper jam inside the cutter of your Argox Label Maker, check the cutter or recover the paper jam.
What to do if my Argox Label Maker displays 'Media out'?
If your Argox Label Maker displays 'Media out', install a new label roll.
What to do if my Argox Label Maker is receiving data?
If your Argox Label Maker is receiving data, the Ready LED will stay solid green as soon as all the data has been received, and the printer will automatically resume normal operation.
What to do if my Argox Label Maker shows a Serial IO error?
If your Argox Label Maker shows a Serial IO error, check the serial baud rate at both your system and the printer.
General| Brand | Argox |
|---|---|
| Model | OS-2130D |
| Category | Label Maker |
| Language | English |
Contains proprietary information of Argox Information Co., Ltd. for users.
States that all specifications are subject to change without notice.
Details compliance with FCC Rules for Class A digital devices.
Argox disclaims liability for errors in specifications and manuals.
Instructions for inspecting the printer for shipping damage and contents.
Identifies external parts like Top Cover, Paper Outlet, Feed Button.
Guidance on handling media rolls to prevent contamination before loading.
Visual steps for placing the media roll onto the printer's hangers.
Guide to calibrating media and printing configuration settings.
Detailed steps to initiate the media calibration process.
Shows an example of the printer's configuration printout.
Details common problems and their LED indications.
Lists available interfaces and their general requirements.
Best practices for maintaining the printer's print head.
Recommended frequency for cleaning the print head.
Specifies suitable materials for cleaning the print head.
Lists the general technical specifications for the printer models.
Describes the port for cash drawer communication.
Details the USB interface specifications and pin assignments.
Information on the RS-232 serial interface and its settings.
