Argus 300 - Managing Photo Albums

1. Reflector, 2. Lamp. 3. Heat con:
denser in mount. 4. Small condenser
5. Large condenser.
‘The proper position of each condenser
is shown in the diagram above. In
replacing them after cleaning make
sure that the curved surfaces face ia
the same direction as shown.
‘The two front condensing lenses are removed completely from
their mounts when cleaning. The small rear heat absorbing
condenser is never removed from ite metal mount, but the
entire mount is removable for cleaning purposes. In replacing
bbe sure to hook entire mount inside the casting as before. Be
sure
to
clean
the
reflector
and
projection
lens
when
cleaning
the condensing lenses. Disty, and particularly finger-printed
lenses and reficctors can reduce picture brightness by half,