Page 3 of 3
Please read all instructions carefully before starting the assembly process. Some parts are large
and heavy and require AT LEAST TWO PEOPLE to assemble, to help prevent possible injury
and or damage to the piece.
Step 1 :
By using the void box, aligned the elongated holes on the metal plate to the underside holes on the desk
according to your desired place.
(This table can be put in either 4 different sides according to your needs).
Step 2 :
Insert the spring washer, washer and hexagonal bolt. Secure the metal by thigtening the bolt with allen key.
Make sure the end of both table flush before thigtening the hexagonal bolt.
Thank
You for Your Purchase
Void
Box
Void
Box
To Next Page