BLUM RUNNER INSTRUCTION
STEP 1: DRAWER REMOVAL INSTRUCTIONS
Step 1.1:
Pull the drawer out. See at bottom of drawer. Unlock by pulling black plastic
peg on runner out.
Step 1.2:
Hold the drawer with both your hands. Carefully lift the drawer front up from the
front metal pin, then slide drawer forward to remove from back hooks.
Step 2.1:
Pull the runner all the way out. Put the drawer onto
them then hold both the runner with your hands. Lift
the drawer up with your thumbs and push to hook the
drawer at end of the runner.
Step 2.2:
After hooks have engaged rear of drawer box, pull glide
back out if necessary so alignment dowel on drawer box
lines up with dowel pin on the glide.
Step 2.3:
Lock the drawer to the runner by pushing the
black plastic peg on the runner in.
STEP 2: DRAWER ASSEMBLY INSTRUCTIONS
STEP 3: DRAWER HEIGHT ADJUSTMENT INSTRUCTIONS
Adjust around gap of drawer by turn plastic button clockwise/counterclock wise direction.
Plastic peg
Hole for pin
Metal pin
Plastic peg
Thank you for your purchase
Hole for pin
Metal pin
Metal hook
Plastic button
To Next Page