Ariel AM Series User Manual

C-Series Whirlpool User Manual with Bluetooth C-Series Whirlpool User Manual with Bluetooth
Turn on/of
f
the Dis
p
la
y
:
This system remains on “standby” when power is supplied to the whirlpool system.
1. If the system is in “standby” mode, the 'Power Standby' on/off icon will be partially visible on the dark screen. On standby, if any
portion of the screen is touched the backlight will display at 50% strength. To activate the system, on the display, press and hold the
'Power Standby' button for 3-seconds. When the unit is first activated the current temperature (°C) will display on the screen. The
temperature sensor is located below the overflow drain knob.
2. There is a 2-hour timer programmed into this system, all functions will automatically turn off and the system will go into “standby”
mode, 2-hours from system activation.
3. To turn off all functions of the system, placing the unit in standby, press the 'Power Standby' button on the display.
Music Feature
: Radio / Bluetooth
While the computer system is on, press the Music button to activate either the FM radio or Bluetooth functions. When the radio function
is selected, a “3 dB” will first show on the display panel, i ndicating a volume adjustment; to adjust the volume, press the
V o lume/Parameter “UP” or “DOWN” buttons until desired volume is achieved. The volume adjustments span from “0” to “19” “dB” (“3 dB”
being default). After 5-seconds the display will change to a frequency reading, indicating a frequency adjustment; to adjust the
frequency, press the Vo lume/Parameter “UP” or “DOWN” buttons until desired frequency is found. The system will automatically use
the last frequency selected when the radio function us used again.
To search for a new radio channel, while the radio function is in the frequency mode, press and hold either the V olume/Parameter “UP”
or “DOWN” button for 2-seconds, and it will automatically search for the next radio station with a strong/steady signal.To program a
frequency into the channel memory, press the Channel Memory button; “CH=1” will display on the screen; use the Volume/Parameter
“UP” or “DOWN” buttons to select different channel numbers (1-10); press the Channel Memory button again to save the frequency to
the channel number of your selection. To select between the preset memory channels, while the radio is functioning, press the Memory
button, then press the Set button, and then use the Volume/Parameter “UP” or “DOWN” buttons.
Water Jet Feature
:
The water pump and features directly related to the whirlpool system only work when the water level inside the tub is above the
water-level sensor. The water-level sensor is hidden behind the tub wall. This system has two sensors; the other sensor is the
temperature sensor. The temperature sensor is visible from inside the tub, usually underneath the overflow drain knob (depending on
model).
Press the 'Wa ter Jet' button to activate the water pump and aslo unlock the other [optional] whirlpool features. If the water level
inside the tub is not above the water-level sensor , the 'Water Jet' icon will flash and the other [optional] whirlpool features will remain
locked. If the water jet feature is turned on but the water is not yet at a safe level, the whirlpool feature will automatically turn on when
the water reaches an appropriate level. The default operating time for the water jets is set for 20-minutes. If the water jet feature and
air bubble feature are both activated, but at different times, both features will still automatically turn off at 20-minutes. To stop the
'Water Jet' feature, press the 'Water Jet' icon for 2-seconds. You will see “OFF” flash on the display.
Underwater Color Light
: C = Color Color: 1 ~ 7
The underwater tub light has color and intensity adjustments. Press the ‘Color Changing Lights’ button to turn on the underwater lights.
The light color is white, first (C=1); to change the intensity of the light, press the ‘Color Changing Lights’ button again to the next
brightness setting; press again to the next brightness setting; press again to turn off; there are 3 color brightness settings and an
“OFF” setting; a cycle of 4-positions in total.
To change the color of the light, while the light function is on, press the ‘Parameter Setting’ button, and then press the 'Parameter UP'
or ‘DOWN’ buttons; the light function will cycle through 7 settings: “C=1” to “C=7”.
Brightness Underwater Light
: B = Brightness Brightness: 1 ~ 3
Another way to adjust the tub light intensity, while the light function is on, press the ‘Light Brightness’ button, and then press the
‘Parameter UP’ or ‘DOWN’ buttons: “B=1” to “B=3”.
To select the Bluetooth function, press the Music button again, cycling past Radio feature. The Bluetooth symbol will appear on the
upper portion of the display, and “bt” near the center of the display. When first turned on, the Bluetooth feature will scan for an audio
source Bluetooth device; use your audio source Bluetooth device to scan and “pair” the connection.
The Bluetooth system is named “Whirlpool”; the password is “1234”. When the Bluetooth systems “pair”, the Bluetooth feature will
chime, indicating they have successfully connected.
The Bluetooth feature will only play audio output, and will not accept vocal input. If there is an incoming or outgoing call during music
streaming, the music will automatically stop playing, and will automatically continue when the call is ended. To deactivate the Bluetooth
feature, press the Music button to cycle the radio feature into the ‘off’ position.
Once a Bluetooth device has been “paired” the system will automatically connect when both Bluetooth devices are activated. If there is
more than one device “paired” to the system, the system will randomly choose one of the devices. If the system automatically connects to
an undesired “paired” device, deactivate the Bluetooth function by pressing the Music button, then press and hold the Music button for 3-
seconds, and then the Bluetooth symbol will start to flash and the system will be placed in scan mode.
Turn off and on the Bluetooth function or open Bluetooth function on the device for connection and pairing with the “Whirlpool”.
Sound volume can adjust using the parameter setting buttons set into 9 different volume levels.
Page 5 / 9
Page 6 / 9

Ariel AM Series Specifications

General

Brand	Ariel
Model	AM Series
Category	Bathtubs
Language	English