EasyManua.ls Logo

Ariens 911173 User Manual

Ariens 911173
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner/Operator Manual
Manuel du Propriétaire/Utilisateur
Razor
04832200 11/14
Printed in USA
ENGLISH
FRANÇAIS
E10
The use of any gasoline exceeding 10% ethanol (E10) or
10% MTBE will void the product warranty.
L’utilisation d’une essence contenant plus de 10%
d’éthanol (E10) ou de 10% de MTBE annulent la garantie.
Models
911173 – LMP
(SN 028000 +)
911175 – LMSP
(SN 028000 +)
911177 – LMSP BBC
(SN 028000 +)
911179 – LMSPE
(SN 028000 +)
911188 – LMSP
(SN 000101 +)
911189 – LMSP BBC
(SN 000101 +)
911190 – LMSPE
(SN 000101 +)
Question and Answer IconNeed help?

Do you have a question about the Ariens 911173 and is the answer not in the manual?

Ariens 911173 Specifications

General IconGeneral
Model911173
EngineBriggs & Stratton
Engine Power6.75 ft-lbs Torque
Cutting Width21 in
Drive TypeSelf-Propelled
Weight80 lb
Deck MaterialSteel
Mulching CapabilityYes
Bagging CapabilityYes
Side DischargeYes
Fuel Tank Capacity1.6 qt
Cutting Height1.25 - 3.75 inches

Summary

INTRODUCTION

THE MANUAL

Before operation, read manuals for safety and controls.

SERVICE AND REPLACEMENT PARTS

Know model/serial numbers for ordering parts or service.

UNAUTHORIZED REPLACEMENT PARTS

PRACTICES AND LAWS

SAFETY

SAFETY RULES

Read and follow safety rules closely to avoid injury or death.

SAFETY DECALS

Decals are visual reminders; follow all messages and replace missing ones.

SAFETY (continued)

Amputation Hazard

Avoid amputation hazard by keeping hands/feet away from rotating blades/belts.

Discharge Hazard

Never direct discharge toward people or property; keep children away.

Tipping Hazard

Serious injury/death from rollover; avoid steep slopes and quick turns.

SAFETY (continued)

Personal Protection

Wear appropriate clothing, safety gear, and footwear.

Pre-Operation Checks

Check nuts/bolts, maintenance schedule, clean unit, inspect safety interlocks.

OPERATION

Model-Specific Operation

Explains OPC/BBC handle functions for different models.

General Operating Rules

Clear area, avoid enclosed spaces, maintain safe condition.

OPERATIONAL GUIDELINES

Slope Operation

Operate safely on slopes to prevent loss of control and tip-overs.

Fuel Handling

Handle gasoline with care, use recommended ethanol blends, and avoid ignition sources.

SERVICE AND STORAGE

Service Procedures

Maintain labels, clean unit, disconnect spark plug before servicing.

Storage

Store in a cool, dry place; never store with fuel indoors.

ASSEMBLY

CARTON CONTENTS

List of items included in the carton.

Handlebar Assembly

Steps to assemble the handlebar for Model 911173.

ASSEMBLY (continued)

Component Setup

Handlebar assembly for other models and initial checks.

Initial Checks

Check oil, set up mower for bagging/discharge/mulching, fill fuel tank.

CONTROLS AND FEATURES

Control Identification

Labels and descriptions of all controls on the mower.

CONTROLS AND FEATURES (continued)

Operator Presence Controls

Explains OPC and OPC/BBC handles and their function.

Handlebar Adjustment

How to adjust handlebar height for comfort and safety.

Wheel Drive Control Lever

Blade Brake Clutch Lever

OPERATION AND SETUP

FILLING FUEL TANK

Instructions for safely adding fuel to the tank.

MOWER SET-UP

Steps for installing grass bag, discharge cover, or mulch plug.

OPERATION AND SETUP (continued)

Mulching Setup

How to install the mulch plug for mulching operations.

ADJUSTING CUTTING HEIGHT

STARTING AND SHUT OFF

Starting Procedures

Steps for manual and electric start.

EMERGENCY STOPPING

How to quickly stop the mower in an emergency.

Shut Off

WASHOUT PORT

MOWING TIPS

General Mowing Advice

Tips for effective and safe mowing.

Mulching Performance

Advice for optimal mulching results.

MAINTENANCE

Control Checks

Verifying the proper function of safety and operational controls.

Engine Checks

Checking engine oil level and cooling fins.

MAINTENANCE (continued)

Mower Blade Service

Inspecting, servicing, and replacing the mower blade.

Blade Sharpening

Proper techniques for sharpening mower blades.

MAINTENANCE (continued)

Drive Belt Check

Inspecting the drive belt for wear or damage.

Cooling & Muffler Checks

Checking engine cooling and muffler condition.

SERVICE AND ADJUSTMENTS

Service Position

How to put the mower in service position for easy access.

Handlebar Adjustment

Adjusting handlebar height and positioning for storage.

SERVICE AND ADJUSTMENTS (continued)

Drive Belt Removal

Steps to remove the drive belt for Models 911173-190.

SERVICE AND ADJUSTMENTS (continued)

Drive Belt Removal (cont.)

Further steps for drive belt removal on Models 911177/189.

SERVICE AND ADJUSTMENTS (continued)

Drive Belt Installation

Steps to install the drive belt for Models 911173-190.

SERVICE AND ADJUSTMENTS (continued)

Handlebar Control Adjustment

Adjusting OPC/BBC cable for proper function.

BATTERY AND CHARGING

Battery Installation

How to install and connect the battery.

Battery Charging

Recommended procedures for charging the battery.

ADJUST WHEEL DRIVE CONTROL

STORAGE

Storage Cleaning

Guidelines for storing the mower.

INSPECTION AND PARTS

Fuel System

Treating the fuel system for storage.

Service Parts

List of common replacement parts and their numbers.

TROUBLESHOOTING

Engine Issues

Common problems and solutions for engine starting.

Cut Quality

Diagnosing and fixing poor grass cutting results.

SPECIFICATIONS

Model Data

Technical specifications for various mower models.

SPECIFICATIONS (continued)

Model Data (cont.)

Continued technical specifications for other mower models.

WARRANTY INFORMATION

Warranty Details

Overview of warranty periods and coverage.

Customer Responsibilities

Actions required from the owner to maintain warranty.

WARRANTY INFORMATION (continued)

Service Locations

Information on finding authorized service representatives.

Warranty Exclusions

Items and conditions not covered by the warranty.

Related product manuals