EasyManua.ls Logo

Ariens 915157-Zoom 34 User Manual

Ariens 915157-Zoom 34
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Zoom ®
Owner/Operator Manual
Manuel Du Proprietaire/Utilisateur
Models
915157 - Zoom 34
915159 - Zoom 42
915161 - Zoom 50
915169 - Zoom 34 CARB
915171 - Zoom 42 CARB
Gasoline containing up to 10% ethanol (El0) or up to 10% MTBE (methyl tertiary butyl ether)is
acceptable for use in this machine.
The use of any gasoline exceeding 10% ethanol (El0) or 10% MTBE will void the product warranty.
II est possible d'utiliser de I'essence contenant jusqu'a 10% d'ethanol (El0) ou 10% de MTBE
(ether methyl-tertiobutylique) sur cette machine.
L'utilisation d'une essence contenant plus de 10% d'ethanol (El0) ou de 10% de MTBE annulent la
garantie.
ENGLISH
,_ _ (_ FRAN(_AIS 03997700B1/11
Printed in USA
Question and Answer IconNeed help?

Do you have a question about the Ariens 915157-Zoom 34 and is the answer not in the manual?

Ariens 915157-Zoom 34 Specifications

General IconGeneral
BrandAriens
Model915157-Zoom 34
CategoryLawn Mower
LanguageEnglish

Summary

Before Operating Your Unit Checklist

Safety

Safety Alerts Explanation

Explanation of safety alert symbols and their meanings for operator safety.

Danger and Caution Warnings

Specific Hazard Warnings

General Safety Rules

General Safety Practices

Slope Operation and Fuel Handling Safety

Battery Safety Precautions

Assembly

Pre-Operation Checks

Safety System and Control Checks

Warning about safety interlock failure and instruction to check all unit controls.

Controls and Features

Control Panel Overview

Identification and function of key controls like ignition, PTO, steering levers, and parking brake.

Engine Speed Controls

Identification of choke and throttle controls for different models.

Operation

Safety Interlock System Operation

Procedure for testing the safety interlock system to ensure proper function.

Ignition Switch Operation

Explanation of the ignition switch's positions for stopping, running, and starting the engine.

Throttle and Choke Operation

Instructions on how to use throttle and choke levers for engine speed control and starting.

PTO Switch and Steering Levers Operation

Mower Lift Pedal and Fuel Management

Engine Starting and Shutting Off

Operating Mower and Transporting Unit

Maintenance Schedule

Each Use Maintenance Tasks

Tasks to perform before or after each use, including safety interlock, brake, and tire checks.

Service and Adjustments

Mower Deck Removal and Installation

Levelling and Adjusting Pitch of Mower Deck

Mower Blade Height Measurement

How to measure and adjust the mower deck height for optimal cutting performance.

Mower Blade Pitch Adjustment

Forward Pitch of Mower Blades

How to measure and adjust the forward pitch of the mower blades for proper cutting.

Side-to-Side Pitch of Mower Blades

How to measure and adjust the side-to-side pitch of the mower blades for even cutting.

Adjusting Mower Deck Height and Pitch

Sharpening Mower Blade

Mower Blade Removal and Installation

Steps for removing and reinstalling mower blades, including safety precautions.

Mower Blade Sharpening Guidelines

Instructions and criteria for sharpening mower blades correctly and when to discard them.

Servicing the Battery

Battery Installation Procedures

Cleaning Battery and Battery Cables

Charging the Battery Safely

Adjusting Steering Levers

Forward Speed Adjustment Procedure

Procedure to adjust steering lever travel for straight-line tracking during forward movement.

Power Take-Off (PTO) Belt Replacement

Hydrostatic Belt Replacement

Troubleshooting

Engine Starting and Running Issues

Common causes and corrections for engine crank/start problems and rough running.

Unit Movement and PTO/Blade Issues

Troubleshooting for unit not moving, PTO/blade engagement, and engine overheating.

Unit Movement and Cutting Troubleshooting

Unit Movement Troubleshooting

Troubleshooting for unintended unit movement, tracking, and creeping.

Cutting Quality Troubleshooting

Reasons and solutions for unsatisfactory cutting performance.

Specifications for Models 915157, 915159, 915161

Specifications for Models 915169, 915171

Limited Warranty Information

Evaporative Emission Control Warranty Statement

Related product manuals