Ariens 915161 User Manual (English)

Questions and Answers:

T
Tracy RobinsonAug 6, 2025
How to troubleshoot starting issues with my Ariens 915161 Lawn Mower?
- L
  Lydia HansonAug 6, 2025
  If your Ariens Lawn Mower engine won't crank or start, several factors could be at play. First, ensure that the safety interlock system is properly engaged and not faulty. If it is faulty, check the safety interlock system. Next, verify that the fuel tank isn't empty and fill it if necessary. A discharged battery could also be the culprit, so charge it. Check for poor connections between the battery and cables, tightening them or cleaning any corrosion. Lastly, inspect the spark plug wires for looseness or replace faulty spark plugs. If all else fails, there may be a faulty electrical system or engine, and you should contact your Ariens dealer.
K
karendelgadoAug 10, 2025
What to do if Ariens 915161 does not move with engine running?
- J
  Judy MoralesAug 10, 2025
  If your Ariens Lawn Mower isn't moving when using the steering levers, the transmission bypass lever may be engaged; disengage it. If that’s not the problem, the hydrostatic belt could be faulty and need replacing. If neither of these solutions works, the transmission may be faulty, and you should contact your Ariens dealer.
B
Brett RileyAug 14, 2025
What to do if PTO or mower blades do not engage or shut off on Ariens Lawn Mower?
- B
  breevesAug 14, 2025
  If the PTO or mower blades on your Ariens Lawn Mower do not engage or shut off, it could be due to several reasons. First, make sure the operator presence switch is depressed by sitting on the seat. If that's not the issue, there might be a faulty operator presence switch. Another possibility is a faulty PTO belt, which would need replacing. Lastly, the issue could stem from a faulty PTO switch, wires, connectors, or clutch. If you suspect any of these, contact your Ariens dealer.
C
colesnyderAug 25, 2025
What causes an Ariens Lawn Mower engine to overheat?
- L
  Lauren SmithAug 25, 2025
  If your Ariens Lawn Mower engine overheats, start by checking the engine oil level and adding oil if it's low. The cooling system might also be plugged, requiring cleaning. If the problem persists, there could be a faulty engine, and you should contact your Ariens dealer.
A
Albert MoralesAug 27, 2025
Why does my Ariens 915161 Lawn Mower not travel in a straight line?
- T
  Todd WatsonAug 27, 2025
  If your Ariens Lawn Mower isn't traveling in a straight line, start by checking the tire pressure. Incorrect tire pressure can cause this issue. If the tire pressure is correct, the steering levers may need adjustment. If neither of these steps resolves the problem, the hydrostatic transmission and/or linkage may need adjustment, and you should contact your Ariens dealer.
G
grace50Sep 1, 2025
How to improve poor cutting quality of Ariens 915161?
- L
  Lisa LongSep 1, 2025
  For poor cutting quality with your Ariens Lawn Mower, ensure the mower deck is level and the mower pitch is correct, adjusting if necessary. Also, check if the mower blades are dull or faulty; sharpen or replace them as needed.
R
Robert GarciaAug 19, 2025
Why is my Ariens Lawn Mower engine running rough?