To Next PageTo Next Page
Need help?Do you have a question about the Ariens A21A42 and is the answer not in the manual?
General| Cylinders | 1 |
|---|---|
| Transmission | Hydrostatic |
| Drive | 2WD |
| Cutting Width | 42 inches |
| Blades | 2 |
| Deck Material | Steel |
| Cutting Height | 1.5 - 4 inches |
| Wheel Size | 15 inches (front), 20 inches (rear) |
| Turning Radius | 18 inches |
Safe practices for operating the tractor under normal conditions.
Precautions for safely operating the tractor on inclines.
Essential safety rules regarding children, towing, and gasoline.
Overall safety guidelines for tractor maintenance and servicing.
Parts required for assembling the steering wheel and installing the seat.
List of tools and procedures for unpacking and removing the tractor.
Detailed steps for attaching the steering wheel assembly.
Instructions for mounting the seat and verifying battery status.
Seat adjustment for comfort and safely moving the tractor off its skid.
Final checks including tire pressure, deck levelness, and brake system.
Explains symbols and defines hazard warnings.
Identifies and explains the location and function of tractor controls.
Procedures for using key controls like parking brake, stopping, and throttle.
How to move the tractor and adjust mower cutting height and gauge wheels.
Procedures for engaging and disengaging the mower blades.
Using ROS and preparing the tractor for transport.
Guidelines for towing and safely operating on slopes.
Pre-start checks including engine oil and fuel.
Procedures for starting the engine in different weather conditions.
Advice for achieving optimal mowing results and performance.
A table outlining maintenance tasks, intervals, and general advice.
Guide for lubricating components and essential pre-operation checks.
Specific checks for brakes, tires, and operator presence systems.
Instructions for mower blade maintenance and battery care.
Checks for belts, transaxle info, and engine lubrication guidelines.
Procedures for engine oil, filter, and air intake system maintenance.
Maintenance for engine cooling, spark plugs, muffler, and fuel filter.
Instructions for cleaning the tractor and its parts.
Instructions for using the deck washout system for cleaning.
Critical safety warnings before performing any service or adjustments.
Steps for detaching and reattaching the mower deck assembly.
Connecting mower deck components and checking belt routing.
Procedures for leveling the mower deck side-to-side and front-to-back.
Details on front wheel alignment, noting it's not adjustable.
Procedures for replacing drive belts and checking the brake system.
Adjusting the motion control lever for proper neutral positioning.
Instructions for jump-starting the tractor with a weak battery.
Proper procedure for connecting and disconnecting jumper cables.
Step-by-step guide for removing and installing the tractor battery.
Procedures for removing hood/grill and adjusting engine controls.
Steps for preparing the tractor, battery, and fuel system for storage.
Procedures for changing oil and preparing cylinders for storage.
General advice for storing the tractor and its components.
Causes and solutions for engine not starting, hard starting, or loss of power.
Addressing excessive vibration and other mechanical problems.
Diagnosing issues with cut quality, blade movement, and grass discharge.
Troubleshooting electrical, drive system, and engine stalling problems.
Essential checks including tire pressure, mower level, belts, and brakes.
Procedures for adjusting the seat and verifying the battery status.
Steps to safely remove the tractor from its shipping pallet.
List of tools and steps for unpacking the tractor.
Detailed steps for attaching the steering wheel assembly.
