To Next PageTo Next Page
Need help?Do you have a question about the Ariens 42" Precision Gear Tractor and is the answer not in the manual?
General| Number of Blades | 2 |
|---|---|
| Engine Brand | Ariens |
| Cutting Width | 42 inches |
| Turning Radius | 18 inches |
| Front Tires | 15 x 6 in |
| Deck Material | Steel |
| Speed | 5.5 mph (forward) |
Provides instructions for operating the Ariens Gear Tractor.
General safety guidelines for operating ride-on mowers.
Instructions for safe general operation of the tractor.
Guidelines for safely operating the tractor on slopes.
Safety precautions regarding children and operating the tractor.
Safety guidelines for towing attachments with the tractor.
Safe handling of gasoline and general service safety.
Owner's duties for maintaining the tractor and ensuring safe operation.
Step-by-step guide to installing the steering wheel.
Procedure for installing and adjusting the tractor seat.
A pre-operation checklist for the new tractor.
Explains the meaning of hazard alert symbols and terms.
Familiarization with tractor controls and adjustments.
General instructions for operating the tractor.
Instructions for stopping the mower blades and ground drive.
Steps to adjust the mower cutting height.
Detailed steps for using the ROS.
Safety warnings and procedures for operating on slopes.
Instructions for adding fuel safely.
Step-by-step guide for starting the engine.
Schedule for regular maintenance tasks.
General advice for maintaining the tractor and warranty.
Checks to perform before each operation.
Verifying the functionality of safety systems.
Step-by-step instructions for changing the engine oil.
Critical safety precautions before servicing.
Adjusting the mower deck for optimal cutting.
Procedures for jump-starting the tractor.
Important steps to prevent fuel system issues during storage.
Causes and corrections for engine not starting.
Causes and corrections for difficult engine starting.
Causes and corrections for engine failing to crank.
Causes and corrections for clicking sound with no start.
Causes and corrections for reduced engine power.
Troubleshooting safety system failures.
Causes and corrections for uneven mowing results.
Critical safety warning regarding slope operation.
