Why Ariens Cutter engine will not start?
The engine might not start because the Safety Interlock System is preventing it. Ensure the key is in the On position, the parking brake is On, and the Power Take Off (PTO) is Off. Another reason could be that the fuel tank is empty or the fuel is contaminated; add or replace the fuel. Also, a clogged or damaged air cleaner can prevent the engine from starting; clean or replace the filter element.
What to do if Ariens Cutter unit will not move or mow when the engine is running?
If the unit won't move or mow, first check if the bypass valves are open and close them. Also, ensure that the Cold Start Disengage is disengaged and the parking brake is not engaged. Another possible cause is that the hydro pump belt or mower belt is broken, worn, or off the pulleys. Inspect belts for wear, damage, and correct position; replace if necessary.
Why Ariens Cutter unit loses power?
Loss of power can be caused by binding in the steering or parking brake linkage. Check the linkage for debris or damage and repair if necessary. It can also be caused by steering levers being out of adjustment.
What to do if there are changes in the sound or vibrations of the Ariens Cutter unit?
Changes in sound or vibrations could be due to loose or missing fasteners; check all fasteners and replace if needed. It could also be related to a mower blade problem; check blades for wear or damage.
Why Ariens Cutter unit pulls sharply to the left or right?
If the unit pulls sharply to the left or right, it could be due to binding in the pump actuating linkage. Check the linkage for debris or damage and repair if necessary. Another possible cause is that the steering levers are out of adjustment.
To Next Page
General