If you are on the border between two sizes, choose the bigger one. If you are unsure
of your size of your ankle orthosis, visit a specialised medical supplies store or consult
the manufacturer.
visit a specialised medical
supplies store and request a demonstraon of the correct method of applying it.
• you feel a noceable but not uncomfortable pressure in the ankle area
• the ankle orthosis does not slip or come down when walking
• the ankle orthosis does not pinch at any point
Size and manufacturer informaon can be found on the label sewn to the top edge
of the ankle orthosis.
The orthosis is placed on the ankle so that both support splints t on the outer
and inner ankle. Tighten the orthosis using the hook-and-loop fasteners so that the
pressure on the ankle is not uncomfortable. To increase the therapeuc eect, put
a support tape over the orthosis. You can see the method of applicaon in the picture.
When pung on the orthosis, it should not come into contact with sharp objects (e.g.
jewellery) or long nails. The orthosis must be stretched evenly, without folds, so as
to achieve the ecient pressure distribuon. If you use body cosmecs, wait about
15 minutes aer applicaon before pung on the orthosis. Should the orthosis be-
come visibly mechanically damaged, stop wearing it and replace it with a new one.
Measured above the ankle
S M
18–21 21–24
L XL XXL
24–27 27–30 30–33
b
To Next Page
Loading...