EasyManua.ls Logo

ARIETE 1769 - Page 14

ARIETE 1769
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
- 12 -
the cover engages perfectly into the corresponding slots on the cover (Fig. 12).
Note: The plug (H) also has a measure.
- Switch on the appliance, selecting the blade rotation speed with the operating dial (A).
The appliance is equipped with a speed scale, from the minimum to the “MAX” one.
It is also possible to select pulse operation by turning the dial (A) anticlockwise to “P”. For the best
use of this function, only turn the dial for a very short time (2-3 sec.).
Note: For softer fruit and vegetables (e.g., bananas), start at slow speed and then increase the speed
as required. For firmer fruit or vegetables (e.g., carrots), use the maximum speed.
- For a smoother result, switch the appliance off, unplug it, remove the cover (L) and, using a
spatula, bring food stuck on the sides of the blender (N) towards the centre.
- Repeat the above steps for processing other foods.
Note: Never place more than 300g of firm fruit or vegetables into the blender at any one time.
Note: To prevent liquid spills, never place more than 1000 ml of soups, purées or other liquids into
blender.
WARNING:
Never remove foods from the sides of the bowl or the blender while the appliance is operating.
Always switch off the appliance and unplug it from the mains power.
To prevent accidents or damage to the appliance, always keep hands and cooking utensils
well away from moving blades or discs.
Always fit the lid before starting the blender.
Before blending warm liquids, always remove the blender filler cap. Never place hot liquids
inside the blender.
CLEANING
WARNING: NEVER PLACE THE APPLIANCE BODY, PLUG OR POWER CORD IN WATER OR
OTHER LIQUIDS; ALWAYS WIPE CLEAN WITH A DAMP CLOTH.
WARNING: ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY MAINS BEFORE
FITTING OR REMOVING SINGLE ATTACHMENTS OR BEFORE CLEANING THE APPLIANCE.
WARNING: The blades are extremely sharp. Always handle them with care.
- Remove all of the attachments used, working in the opposite order to the way they were fitted.
- All attachments can be washed in the top rack of the dishwasher, at a maximum temperature of
50°C/ 122°F.
- Wipe the power base (B) clean with a slightly damp cloth.

Related product manuals