Need help?Do you have a question about the arietta DKW001MX 36 and is the answer not in the manual?
Turn off the power circuit at the service panel and lock it out before installing the kit.
Remove the grease filter, pullout springs, and then remove the used charcoal filter.
Position the charcoal filter over the grease filter and insert the 4 springs to prevent movement.
General| Model | DKW001MX 36 |
|---|---|
| Category | Ventilation Hood |
| Width | 36 inches |
| Number of Fan Speeds | 3 |
| Maximum Airflow | 400 CFM |
| Noise Level | 65 dB |
| Lighting | LED |
| Filter Type | Aluminum Mesh |
| Material | Stainless Steel |
| Color | Silver |
| Ventilation Type | Ducted |
| Control Type | Push Button |
To Next Page
