Ariston 3318991 - Page 33

GB / 33
4.1 Types of possible installations
Type 1
Activation of TD and RC in a basic heating system(g.1)
System where the Ariston product is connected exclusively to a single ON/OFF
temperature regulation accessory and you need to go there to activate the Ariston Net
Remote Control and Teleassistance services.
Actions required (Fig. 2):
- Remove the ON/OFF accessory and disconnect the bipolar cable from the TA input
of the boiler
- Install Ariston Sensys and the gateway, connecting them to the heating product via
the BridgeNet BUS connection.
TA
BUS
Fig.1
Fig.2.
THERMOSTAT
SENSYS
GATEWAY