Ariston 3318991 - Installing Sensys Net

34 /GB
TA
TABUS
Fig.3
Fig.4
THERMOSTAT
THERMOSTAT
GATEWAY
Type 2
Activation of RD alone in a basic heating system with (g.3) .
System where only Teleassistance is activated for the Service Centre is activated
without installing the Ariston Sensys accessory.
Actions required (Fig. 4):
In this configuration, any ON/OFF temperature regulation accessory already present in
the house can be left installed. Therefore it is only necessary to:
- Install the gateway, connecting it to the heating product via the BridgeNet BUS
connection.