34 /
GB
4.2 Installation options on systems
Type 1
Activation of RD and RC in a system with single-zone heat pump (Fig. 1)
System in which the Ariston product is connected exclusively to a single temperature
regulation accessory and the Ariston Net Remote Control and Remote Assistance
services must be activated. It is possible to remotely control the cooling function, if
available.
Actions required (Fig. 2):
- Install the gateway by connecting it to the heating system via the BridgeNet BUS
connection
BUS
BUS
fi g.2
fi g.1
GATEWAY
SENSYS
SENSYS
To Next Page
Loading...