Need help?Do you have a question about the Ariston 500 ST6 DIRECT and is the answer not in the manual?
General| Brand | Ariston |
|---|---|
| Model | 500 ST6 DIRECT |
| Category | Water Heater |
| Language | English |
Ensures wholesome water supply and approved materials for water conveyance.
Statutory requirements for unvented hot water systems, requiring competent installers.
Details the components included with different models of unvented cylinders.
Describes how the immersion heater and thermostat control water temperature.
Specifies minimum pressure and flow rates, and maximum supply pressure for the unit.
Details current I.E.E. wiring regulations and supply requirements for direct and indirect systems.
Instructions for fitting immersion heaters for the Contract range, including safety notes.
Wiring instructions for direct and indirect systems, including thermostat settings and thermal cut-outs.
Steps to check the appliance and controls after installation before user handover.
Guidelines for periodic checks of anodes, descaling, and expansion vessel recharging.
Procedure for checking and replacing magnesium anodes, crucial for preventing corrosion.
Instructions for checking line strainers, expansion vessel pressure, and relief valves.
Table of common faults, their possible causes, and recommended remedies for troubleshooting.
Table detailing model capacities, pipe sizes, dimensions, and weight when full.
Table showing time taken to raise water temperature for different models and heating methods.
Illustrations of system layouts, discharge pipework safety, and valve configurations.
List of compatible boilers for use with the unvented cylinder systems.
Conditions and periods covered by the manufacturer's guarantee for the water heater.
Defines who qualifies as an MTS authorised Service Engineer for warranty purposes.
To Next Page