UK
24
IF THE AIR CONDITIONING UNIT DOES NOT WORK
1. If the air conditioning unit gives no sign of life, check the supply voltage:
- is the appliance plug fully in the socket?
- has the automatic switch blown?
- has there been a power failure?
2.
If the cooling (or heating) ef
fect seems to be lower than normal:
- has the temperature been set correctly on the remote control?
- has a door or window been opened?
-
is the Internal Unit exposed to direct sunlight?
- are the filters clogged?
- are there any obstacles obstructing the free circulation of air to the Internal
Unit or External Unit?
1.
Clean the filters and secure them back in place.
2.
On a sunny day
, operate the air conditioning unit in ventilation mode for a
few hours, so that the inside is dried completely.
3.Unplug the appliance or disable the automatic switch.
END OF SEASON MAINTENANCE:
ATTENTION:
- Unplug the appliance or switch off the dedicated switch before performing any
operations.
(risk of personal injury from electrocution).
- Do not touch the air conditioning unit with wet hands (risk of personal injury from
electrocution).
- When cleaning the appliance, do not climb onto a table or unstable chair (risk
of personal injury from falling from a height).
- When removing filters, take care not to touch any metal parts, especially the
heat exchanger inside the internal unit (risk of personal injury from cuts).
When:
- the Internal Unit does not emit a confirmation Beep
- the liquid crystal display does not come on
How:
- remove the cover by pulling it gently downwards as illustrated
- replace the batteries, respecting the + and - symbols
N.B.
- Use new batteries only.
- Remove the batteries from the remote control when the air
conditioning unit is not in use.
REPLACING THE BA
TTERIES
ATTENTION:
If the remote control doesn't work to verify the position of the
selector set next to the batteries; the selector will have to be in
position “B”.
Size AAA 1,5V
To Next Page
Loading...
Need help?
General
