44
GB
menu summary table
MENU
SUB-MENU
PARAMETER
DESCRIPTION RANGE NOTES
3 6 1 Solar circuit pressure
362Tank capacity
3 6 3 Showers n°
364Tank fi ll rate
3 8 Error History
3 8 0 Last 10 Errors
3 8 1 Reset Error List
3 9 Reset Menu
3 9 0 Reset Factory Settings OK = RESET
CODE DESCRIPTION
201 DHW Probe Damaged
202 Storage Lower Probe Damaged
203 Tank Probe Damaged
204 Solar Collector Probe Damaged
205 DHW In Probe Open Circuit
207 Solar Coll Max Temp
208 Solar Coll Frost Prot
209 Tank Overheat
210 Storage Higher Probe Damaged
211 SM CH Return Probe Damaged
212 SM NTC Collector In Damaged
213 SM NTC Collector Out Damaged
214 SM Undefi ned Hydraulic Scheme
215 SM Pressure Sensor Disconnected
216 SM Low pressure error
217 SM Anode Fault
2P1 SM Low pressure warning
Restoring operation
If the module shuts down, a code will appear on the system interface display signalling the type of shutdown
and the reason behind it. To restore normal operation, it is advisable to contact an authorised Technical Sup-
port Centre.
Error table
To Next Page
Loading...