To Next PageTo Next Page
Need help?Do you have a question about the Ariston FAST EVO ONT B 14 and is the answer not in the manual?
General| Mounting | Wall-mounted |
|---|---|
| Fuel Type | Natural Gas |
| Gas Connection | 1/2 inch |
| Water Connection | 1/2 inch |
| Width | 330 mm |
| Height | 580 mm |
| Heating Time | Instantaneous |
| Temperature Range | 35-65°C |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Maximum Pressure | 10 bar |
| Minimum Pressure | 0.2 bar |
| Color | White |
| Type | Instantaneous Gas Water Heater |
| Capacity | 14 liters |
| Flow Rate | 14 L/min |
Emphasizes the mandatory installation by approved personnel for safety and compliance.
Outlines immediate actions to take if a gas smell is detected.
Provides instructions for handling a burn-back event in the burner tube or chamber.
Details requirements for user installation and installer obligations.
Mandates compliance with legal regulations for installation and maintenance.
Advises on turning off the appliance and contacting professionals for repairs.
Warns about the risk of severe burns from water exceeding 50°C.
Lists operations to avoid and highlights electrocution risks from live components.
Details risks related to falling objects, climbing, and working at heights.
Alerts users to dangers of gas leaks, explosions, fires, and intoxication.
Lists error codes indicated by the LED and their corresponding checks.
Explains temporary shutdowns due to flue gas discharge anomalies.
Advises on immediate actions for malfunctions and contacting service technicians.
Reiterates key warnings regarding water temperature, flue gas sensors, and activation.
Covers safety aspects of electrical connections and gas system integrity to prevent leaks.
Explains how to connect the gas supply, ensuring correct type and pressure.
Outlines essential checks for the gas supply before the first ignition.
Describes how to check the gas supply pressure using a manometer.
Guides on adjusting and checking the burner pressure for maximum and minimum outputs.
Details the procedure for setting and checking the slow ignition power.
Explains the appliance's protective shut-off mechanisms and LED error codes.
Details temporary shutdowns related to flue gas discharge safety.
Outlines actions for malfunctions and checks for specific error conditions.
Instructs customers on how to report issues directly to the service center.
Summarizes the warranty terms, conditions, and exclusions.
