Need help?Do you have a question about the Ariston Heaters and is the answer not in the manual?
Basic safety precautions to reduce risk of fire, electric shock or injury.
Specifications for P10 S and P15 S models including capacity, voltage, power.
Installer should review manual with owner and leave it in a safe location.
Manufacturer disclaimer for improper installation and risk of scald injury.
Fasten mounting bracket to wall and hang heater securely.
Fill tank, check for leaks, open faucets until constant flow.
Adjust thermostat dial for temperature control and freeze protection.
Procedures for draining the water heater using flexible hoses or rigid piping.
Steps to remove the heating element for replacement or descaling.
How to inspect and replace the anode rod to prevent tank corrosion.
Steps to replace the heating element, including anode rod and gasket.
Procedure for replacing the thermostat and reconnecting wiring.
Checks for common issues when the water is not heating.
Steps to diagnose why the indicator light is not functioning.
Indicates a 'spent' anode rod, requiring replacement.
Suggests checking the anode rod for unusual water reactions.
Instructions to lower temperature setting or replace thermostat.
Inspect fittings, T&P fitting, and heating element gasket for leaks.
CEC guarantees the water heater against defects in material and workmanship.
Specifies warranty duration for the inner tank and other component parts.
Lists situations and conditions not covered by the limited warranty.
Steps for the owner to contact the dealer or CEC for service or warranty claims.
To Next Page
General