EasyManua.ls Logo

Ariston PRO1 ECO 100V - Technical Characteristics

Ariston PRO1 ECO 100V
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL CHARACTERISTICS
For the technical specications, refer to the nameplate (the nameplate is located next to the water intake/outlet pipes).
Table 1 - Product information
Product range 50 80 100
Weight when empty (kg) 17 22 26
Weight when full (kg)
66 97 121
Installation
Vertical Vertical Vertical
Model Refer to the nameplate
SMART X X X
Qelec (kWh) 6,855 7,115 7,439
Qelec, week, smart (kWh) 24,928 25,699 25,765
Qelec, week (kWh) 28,997 31,110 32,868
Load prole M M M
L
wa
(dB) 15
wh
39,8% 39,8% 40,0%
V40 (L) 65 92 130
Heat loss (kWh/day) 0,917 1,253 1,434
Heat up times [15-60°C] (minutes) 60 97 128
Maximum inlet pressure [rated pressure] (bar) 12
Maximum design pressure (bar) 6
Set operating pressure expansion valve (bar) 6
Pre-charge pressure of the expansion vessel (bar) 3,5
Set opening T&P relief valve (bar) 7
Capacity (l) 49 75 95
The power consumption data in the table and the other information given in the Product Data Sheet (Enclosure A to this
manual) are dened in relation to EU Directives 812/2013 and 814/2013.
The products without the label and the data sheet for water heaters and solar devices, stipulated in regulation 812/2013,
are not intended to be used in such assemblies.
The device is equipped with a smart function that allows you to adapt the consumption to the user proles. If operated
correctly, the device has a daily consumption of “Qelec* (Qelec,week,smart/Qelec,week)” less than that of an
equivalent
product with no smart function.
This appliance is conforming with the international electrical safety standards IEC 60335-1 and IEC 60335-2-21.
The CE marking of the appliances attests its conformity to the following EC Directives, of which it satises the
essential requisites:
- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-21, EN 60529, EN 62233, EN 50106.
- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.
- RoHS2 Risk of Hazardous Substances: EN 50581.
- ErP Energy related Products: EN 50440.
- EN 12897:2016
This product is in conformity with REACH regulations.

Related product manuals