To Next PageTo Next Page
Need help?Do you have a question about the Ariston PRO1 R 80 H and is the answer not in the manual?
General| Type | Electric Storage Water Heater |
|---|---|
| Capacity | 80 Liters |
| Voltage | 230 V |
| Max. working pressure | 8 bar |
| Max. working temperature | 75°C |
| Width | 450 mm |
| Depth | 480 mm |
| Energy Efficiency Class | C |
| Heating Element | Copper |
| Thermostat | Adjustable |
| Safety Features | Safety valve |
| Warranty | 2 years |
Read instructions and warnings carefully for safe installation, use, and maintenance.
Installation and maintenance must be performed by qualified personnel using original spare parts.
A safety valve must be installed on the water inlet pipe according to national regulations.
Hot water over 50°C can cause burns; use a thermostatic mixer valve.
Product, excluding horizontal models, must be installed vertically for correct operation.
Connect the water heater's inlet and outlet with pipes or fittings.
Use pipes/fittings resistant to temperatures exceeding 90°C and working pressure.
Do not supply water with hardness less than 12°F or greater than 25°F; use softener if needed.
Ensures safety devices comply with European standard EN 1487.
Do not install shut-off devices between the safety unit and the heater.
Ensure correct and safe electrical connection according to standards.
Mandatory to control electrical system compliance with safety standards and power capacity.
Do not use plumbing, heating, or gas pipes for appliance earthing connection.
The appliance must be grounded with a yellow/green cable longer than the phase cable.
Procedures for testing and igniting the appliance.
Fill the heater with mains water before powering up the appliance.
Check for absence of power or water failure before requesting technical service.
Disconnect the appliance from the mains before performing any maintenance work.
Procedures for emptying the appliance when left unused or in frost-prone areas.
Steps for accessing and replacing electrical equipment, thermostat, heating element, and anode.
Use only original spare parts from authorized service centers.
Guidelines for periodical maintenance, including descaling and anode replacement.
General user instructions for operating and regulating the appliance.
Never attempt to repair the appliance yourself; always contact a qualified technician.
