Ariston RD 40 - Introduction; 1. Important Instructions

ARISTON ACOUSTICS LIMITED
RD 40 INSTRUCTIONS
Thank you for your purchase of the Ariston RD4Q Turntable. The RD40
system is a new generation of turntable designed to represent the tinest value tor
money together with the best performance, we at Ariston can produce. Based on
our research and experience over long years the RD4O resolves many of the
delicate problems associated with Super Quality Audiophile turntables, and
finally brings the listening pleasure associated with these turntables within the
reach of most discerning purchasers,
The RD40 is a system, and may be tailored to suit the needs of the individual.
its specification may include the following accessories: —
Isolating Base,
Cover,
D.C, Module.
Heavy Piatter.
Adjustable Feet.
Heavy Springs.
Ariston Tone Arm.
Mass Rings,
SaaS ee
Consult your dealer for details since most of these parts may be retro fitted.
INTRODUCTION
1. IMPORTANT INSTRUCTIONS
1.1. It is critical that the main bearing housing does not become contaminated by
dust of any other foreign matter.
1.2 Do not attempt to dismantle the motor assembly as this unit is tuned during
production to provide optimum performance,
1.3 Your Ariston turntable can be supplied for service an 220 - 240 valts 50 hz
or 110 volts GO hz A.C. mains supply. Before connecting to the mains
supply, check both the supply voltage and other information on the rating
plate on the rear of theunit. Motors coded white 200 - 240 volts 50hz A.C,
Motors coded red 100 - 120 volts 60 hz A.C. These markings are placed on
the top of the motor.
If required at any timne, a mains supply conversion kit may be obtained from
Ariston Acoustics Ltd., through your local Ariston agent.