ARJO HUNTLEIGH FLOWTRON HYDROVEN 3 User Manual

28 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

FLOWTRON HYDROVEN 3

Instructions for Use

...with people in mind

0086

I

2

0

4

0

60

8

0

1

0

0

120

mmHg

Questions and Answers:

S
Spencer JimenezAug 1, 2025
What to do if ARJO HUNTLEIGH Water Pump operates but garment will not inflate?
- C
  Colleen WhitakerAug 2, 2025
  If the ARJO HUNTLEIGH Water Pump operates but the garment won't inflate, there might be a blockage in the garment supply tube. Ensure the tube airway is clear and check the connections. Also, the garment might not be correctly fitted to the pump, so check the connections. The pressure control might be set too low, so increase it. Finally, there could be an air leak in the garment; check the garment and replace it if it's defective.
F
Frank MccoyAug 15, 2025
How to troubleshoot ARJO HUNTLEIGH Water Pump that does not power up?
- K
  Kelly LopezAug 15, 2025
  If the ARJO HUNTLEIGH Water Pump does not power up, check the switch and connections. If the problem persists, call a Service Engineer.

ARJO HUNTLEIGH FLOWTRON HYDROVEN 3 Specifications

General

Brand	ARJO HUNTLEIGH
Model	FLOWTRON HYDROVEN 3
Category	Water Pump
Language	English

Summary

General Safety

1. Introduction

2. Clinical Application

Indications and Contraindications

Lists clinical conditions for use and circumstances where the system should not be used.

Safety Precautions and Warnings

Cautions and Warnings

Advises on using the system with care and highlights critical safety points.

3. Clinical Treatment Guide

4. Garment and Insert Information

Applying the Garment

Provides step-by-step instructions for fitting the garment onto the patient.

5. Operation

Pump Description and Controls

Identifies pump components and explains their functions and operation.

Operation Procedure, Shutdown, and Removal

Details system operation, shutdown, and garment removal procedures.

6. Decontamination

Cleaning and Disinfection Procedures

Garment Cleaning and Sterilisation

7. Routine Maintenance

System and Pump Maintenance

8. Troubleshooting

Fault Finding and Service Returns

Guide to identifying faults, remedies, and procedures for returning the product.

10. Technical Specification

Pump Specifications