5
Control
5HIHUWRWKHPDQXIDFWXUHU¶VKDQGERRNEHIRUHLQVWDOOLQJWKHFRQWUROOHU
Make sure that the voltage of both the solenoid unit and controller are correct.
Set the manual operation button to automatic.
&KHFNWKDWWKH¨3K\GUDXOLFVZLWFK+,*+DQG/OW pressure lines are correctly connected to
the appropriate ports.
6HWWKHVWDUWLQJEDFNZDVKVZLWFKWR¨3-7 meters (6 - 8p.s.i.).
Set the controller to a flush time of 30 seconds and a dwell time of 10 seconds. These
settings may require adjustment to conform to local water conditions. Typically, a 1 to 3 hour
interval between backwashes is recommended.
DRAIN
OUT
IN
PD
Back Flushing controller
P
COMMAND
WATER FILTER
HP
LP
COMMAND