Need help?Do you have a question about the Arkel ARL-500 and is the answer not in the manual?
General| Brand | Arkel |
|---|---|
| Model | ARL-500 |
| Category | Control Systems |
| Language | English |
Details the step-by-step recommended procedure for installing the ARL-500 system.
Explains the installation and wiring of the control panel for the ARL-500.
Guides on connecting shaft safety circuits to the KBK-9 board.
Covers the installation and wiring of the pit panel for the ARL-500.
Details the connection of pit safety circuits using the X-PB3 plug.
Explains how to connect the travelling cable to control panel and inspection box boards.
Details the wiring and connections for the REVKON car top controller in the inspection box.
Guides on connecting car safety circuits to the REVKON car top controller.
Explains installation and connection of spool switches for top/bottom limits.
Covers installation and connection of bi-stable magnetic switches.
Details how to check the functionality of top and bottom limit switches.
Guides on adjusting general system settings like operating mode and drive type.
Explains how to assign functions to the controller's programmable outputs.
Guides on assigning functions to the controller's programmable inputs.
Allows setting door types for each floor, individually or uniformly.
Explains connecting a second KABKON board for systems with over 24 stops.
To Next Page
